- Author Index

A

Abasi, Somaye Static bending analysis of thin circular plates of FGM on a Pasternak elastic foundation by Differential Transform Method [Volume 9, Issue 4, 2018, Pages 10-16]
Abbaspoursani, K Thermodynamic Analysis of a Gas Preheater at Zandjan City Gate Station [Volume 8, Issue 1, 2016, Pages 27-32]
Abbaspoursani, K. Experimental Analysis of a Vertical, Double-Effect Diffusion Solar Still [Volume 8, Issue 1, 2016, Pages 3-10]
Abdalisousan, Ashkan Gas Turbine Cycle Exergoe Conomic Analysis With Solar Air Prehe Ater Instalation [Volume 9, Issue 2, 2017, Pages 28-35]
Alizadeh, S. Analysis of Unfavorable Effects of Wind on a Dry Cooling Tower and Optimization of its Performance [Volume 8, Issue 1, 2016, Pages 41-50]
Alizadeh, S. Experimental Analysis of a Vertical, Double-Effect Diffusion Solar Still [Volume 8, Issue 1, 2016, Pages 3-10]
Azami, Mansour Structural damage detection using Hilbert-Huang Transform and instantaneous signal phase [Volume 8, Issue 4, 2017, Pages 3-12]

B

Bahari, Sara Numerical Investigation of Pipe Array in a Shell and Tube Heat Exchanger Filled with PCM as a Porous Media [Volume 8, Issue 1, 2016, Pages 19-26]
Bayat, A. B. Thermodynamic Analysis of a Gas Preheater at Zandjan City Gate Station [Volume 8, Issue 1, 2016, Pages 27-32]
Bazi, Yaser Modeling the equipment of fluid managing in liquid propellant engine rocket tanks [Volume 9, Issue 4, 2018, Pages 17-23]
Behmanesh, Vahid Modeling Design and Optimization of a Multistream Heat Exchanger with Offset-Strip Fins in Order to Integrate the Heat Streams [Volume 8, Issue 4, 2017, Pages 43-51]

D

Dadkhah, A. Experimental Analysis of a Vertical, Double-Effect Diffusion Solar Still [Volume 8, Issue 1, 2016, Pages 3-10]
Daghayeghi, bazar xergy Analysis for AC Electric Arc Furnace of an Steel Production Factory [Volume 9, Issue 1, 2017, Pages 46-50]
Davoodi, Sina Determination Of Fracture Forming Limit Diagram In Single Point Incremental Forming For aluminum alloy 3105 [Volume 8, Issue 3, 2017, Pages 35-41]

F

Fazaeli, Davood Estimation of force in the cold direct extrusion in circular cross section using finite element method ABAQUS [Volume 8, Issue 4, 2017, Pages 37-43]

G

Ghaffari, A. A. Analysis of Unfavorable Effects of Wind on a Dry Cooling Tower and Optimization of its Performance [Volume 8, Issue 1, 2016, Pages 41-50]
Ghaffarnezad, A. Analysis of Unfavorable Effects of Wind on a Dry Cooling Tower and Optimization of its Performance [Volume 8, Issue 1, 2016, Pages 41-50]
Ghazi, M. Modeling Design and Parametric Investigation of Combined Kalina Cycle, Geothermal Energy and Multi-Effect Desalination to Produce Power, Heat and Freshwater [Volume 8, Issue 2, 2016, Pages 28-37]
Ghazi, Mehrangiz Modeling Design and Parametric Investigation of Combined Kalina Cycle, Geothermal Energy and Multi-Effect Desalination to Produce Power, Heat and Freshwater [Volume 8, Issue 3, 2017, Pages 3-11]
Ghazi, Mehrangiz Modeling Design and Optimization of a Multistream Heat Exchanger with Offset-Strip Fins in Order to Integrate the Heat Streams [Volume 8, Issue 4, 2017, Pages 43-51]
Ghazi, Mehrangiz Three Stream Plate Fin Heat Exchangers Simulation and Design Using Secondary Surface Selection Method and Optimization with Genetic Algorithm [Volume 9, Issue 3, 2018, Pages 25-33]
Ghenaati, Hossein Mass Optimization of Liquid Fuel Rocket Engines’ Under Pressure Reservoirs Utilizing Composites [Volume 9, Issue 1, 2017, Pages 27-37]
Golshan, Ali Optimization Design of Thin Film Solar Cells for Nano-Area Applications at Visible Wavelenght [Volume 8, Issue 3, 2017, Pages 18-27]

H

Hakami, Pasha Investigation of performance of solar heaters using Nano-fluid and twisted-tape inserted in tubes [Volume 9, Issue 3, 2018, Pages 41-49]
Hasanzadeh, Javad Optimization Design of Thin Film Solar Cells for Nano-Area Applications at Visible Wavelenght [Volume 8, Issue 3, 2017, Pages 42-52]
Hassani, Hamed Experimental and analytical study of heat recovery from continuous casting billet production with aim of heating and domain hot water [Volume 9, Issue 1, 2017, Pages 21-26]
Hassanian, Mehdi noise reduction of vibrational signals based on singular spectrum analysis and fault diagnosis of ball bearing using artificial neural network [Volume 9, Issue 2, 2017, Pages 13-20]
Haydari, F Thermodynamic Analysis of a Gas Preheater at Zandjan City Gate Station [Volume 8, Issue 1, 2016, Pages 27-32]
Heidari, Ali Experimental study of effective parameters on mechanical properties of resistance spot welding of super alloy Inconel 625 [Volume 9, Issue 4, 2018, Pages 24-34]

I

Islami, Seyed Gholamreza Explaining architectural and mechanical design methods for creating human comfort in the architectural space [Volume 9, Issue 3, 2018, Pages 3-15]

J

Jalali, Esmaeil Effect of Injection on the Microchannel Wall on the Slip Velocity the Heat Transfer of Water-AL2O3 Nanofluid in Microchannel [Volume 9, Issue 1, 2017, Pages 10-20]

K

Karimipour, Arash Effect of Injection on the Microchannel Wall on the Slip Velocity the Heat Transfer of Water-AL2O3 Nanofluid in Microchannel [Volume 9, Issue 1, 2017, Pages 10-20]
Khani Esfand Abad, N. The Effect of Metallic and Non-metalic Nano-coatings and Polarization of Incident Radiation on Radiation Properties of Nono-coatings [Volume 8, Issue 2, 2016, Pages 3-8]
Khodadadi, Hasan Experimental investigation of five affecting parameters on geyser boiling in a two-phase closed thermosyphon [Volume 8, Issue 4, 2017, Pages 13-18]
Kolahdooz, Amin ptimization of the Steam Turbine Efficiency using Genetic Algorithm [Volume 9, Issue 1, 2017, Pages 3-9]
Kolahdooz, Amin Production and study performance of a sample of 3000 PSI electro-hydraulic valve used in the aviation industry [Volume 9, Issue 2, 2017, Pages 36-40]
Kolahdooz, Amin Experimental study of effective parameters on mechanical properties of resistance spot welding of super alloy Inconel 625 [Volume 9, Issue 4, 2018, Pages 24-34]
Kolahdoozan, Mojtaba A review of milling with the minimum quantity lubrication using vegetable oils [Volume 9, Issue 3, 2018, Pages 50-59]
Kolahduzan, M. Performance of Micro-electromechanical systems devices for space applications [Volume 8, Issue 2, 2016, Pages 23-27]
Kuhgard, Hasan Numerical simulation of steady blood flow through an rigid artery [Volume 8, Issue 4, 2017, Pages 28-36]

M

Mirjalili, S.A.A The Effect of Metallic and Non-metalic Nano-coatings and Polarization of Incident Radiation on Radiation Properties of Nono-coatings [Volume 8, Issue 2, 2016, Pages 3-8]
Mirjalili, Seyed Aliagha Optimization Design of Thin Film Solar Cells for Nano-Area Applications at Visible Wavelenght [Volume 8, Issue 3, 2017, Pages 18-27]
Mirjalily, S. A. A. Effects of Nanofluids on the Temperature and Velocity of the Flow in a Flat Plate Solar Thermosiphon Collector [Volume 8, Issue 1, 2016, Pages 33-40]
Mobasseri, Saleh Investigation of the effect of hemolymph on biochemical behavior of dragonfly wing veins [Volume 9, Issue 2, 2017, Pages 41-48]
Moghoumi, Mohammad Reza ptimization of the Steam Turbine Efficiency using Genetic Algorithm [Volume 9, Issue 1, 2017, Pages 3-9]
Mohammadi, Sattar A review of milling with the minimum quantity lubrication using vegetable oils [Volume 9, Issue 3, 2018, Pages 50-59]
Mohammadi Esfarjani, S. Performance of Micro-electromechanical systems devices for space applications [Volume 8, Issue 2, 2016, Pages 23-27]
Monfared, Vahid Estimation of force in the cold direct extrusion in circular cross section using finite element method ABAQUS [Volume 8, Issue 4, 2017, Pages 37-43]
Moradi, Gholam Abas Experimental study of effective parameters on mechanical properties of resistance spot welding of super alloy Inconel 625 [Volume 9, Issue 4, 2018, Pages 24-34]
Musavi, Mir Hedayet Analytical Study of The Nonlinear Fluid Flow Equation In The Porous Media With The Considering of The Forchheimer Term and The Convection Heat Transfer Coefficient Evaluation [Volume 9, Issue 1, 2017, Pages 38-44]

N

Negahi, A. Numerical Investigation of Heat and Fluid Flow in a Ventilated Cavity with Nanofluids using two-phase mixture model [Volume 8, Issue 1, 2016, Pages 3-18]
Nikian, M. A double vortex tube and experimental comparison with conventional vortex tube [Volume 8, Issue 2, 2016, Pages 9-16]
Nikian, M. Modeling Design and Parametric Investigation of Combined Kalina Cycle, Geothermal Energy and Multi-Effect Desalination to Produce Power, Heat and Freshwater [Volume 8, Issue 2, 2016, Pages 28-37]
Nikian, Mohammad Numerical Investigation of Pipe Array in a Shell and Tube Heat Exchanger Filled with PCM as a Porous Media [Volume 8, Issue 1, 2016, Pages 19-26]
Nikian, Mohammad Experimental study of nano-fluids viscosity in the absence and presence of conductive magnetic field [Volume 8, Issue 3, 2017, Pages 28-34]
Nikian, Mohammad Optimization Design of Thin Film Solar Cells for Nano-Area Applications at Visible Wavelenght [Volume 8, Issue 3, 2017, Pages 42-52]
Nikian, Mohammad Modeling Design and Parametric Investigation of Combined Kalina Cycle, Geothermal Energy and Multi-Effect Desalination to Produce Power, Heat and Freshwater [Volume 8, Issue 3, 2017, Pages 3-11]
Nikian, Mohammad Numerical simulation of steady blood flow through an rigid artery [Volume 8, Issue 4, 2017, Pages 28-36]
Nikian, Mohammad Modeling Design and Optimization of a Multistream Heat Exchanger with Offset-Strip Fins in Order to Integrate the Heat Streams [Volume 8, Issue 4, 2017, Pages 43-51]
Nikian, Mohammad Experimental and analytical study of heat recovery from continuous casting billet production with aim of heating and domain hot water [Volume 9, Issue 1, 2017, Pages 21-26]
Nikian, Mohammad Aerodynamic optimization and numerical simulation of 550 KW horizontal axial wind turbine LM19 series blade [Volume 9, Issue 3, 2018, Pages 16-24]
Nikian, Mohammad Modeling and Economical Evaluation of Hybrid Energy Systems for Remote Area [Volume 9, Issue 3, 2018, Pages 34-40]
Nikian, Mohammad Investigation effect of PCM using on cooling system at building in Zanjan climate [Volume 9, Issue 4, 2018, Pages 3-9]
Nikian, Mohammad Effect of Hot Rolling Parameters on Roller Heat Transfer [Volume 9, Issue 4, 2018, Pages 35-42]
NiKosh, Khayam Analysis and investigation of various liquid propellant injectors with a critical view [Volume 9, Issue 4, 2018, Pages 43-51]

O

Oloomi, S. A. A. Effects of Nanofluids on the Temperature and Velocity of the Flow in a Flat Plate Solar Thermosiphon Collector [Volume 8, Issue 1, 2016, Pages 33-40]
Oloomi, S. A.A. Numerical Investigation of Heat and Fluid Flow in a Ventilated Cavity with Nanofluids using two-phase mixture model [Volume 8, Issue 1, 2016, Pages 3-18]
Oloomi, S.A.A. The Effect of Metallic and Non-metalic Nano-coatings and Polarization of Incident Radiation on Radiation Properties of Nono-coatings [Volume 8, Issue 2, 2016, Pages 3-8]
Oloomi, Seyed Amir Abbas Optimization Design of Thin Film Solar Cells for Nano-Area Applications at Visible Wavelenght [Volume 8, Issue 3, 2017, Pages 18-27]
Olumi, S. A. A. Numerical Investigation of influence conductivity and convection Heat Transfer Compound non-Newtonian fluid Different Gradient the temperature inside the chamber [Volume 8, Issue 3, 2017, Pages 12-17]

P

Pirmohammadi, Mohsen Modeling and Optimization of Cooling System of Passenger Train with Refrigerant Air [Volume 9, Issue 2, 2017, Pages 3-12]

R

Rahmani, Saeed Experimental study of nano-fluids viscosity in the absence and presence of conductive magnetic field [Volume 8, Issue 3, 2017, Pages 28-34]
Rahnama, A. Modeling Design and Parametric Investigation of Combined Kalina Cycle, Geothermal Energy and Multi-Effect Desalination to Produce Power, Heat and Freshwater [Volume 8, Issue 2, 2016, Pages 28-37]
Rahnama, Ahmad Modeling Design and Parametric Investigation of Combined Kalina Cycle, Geothermal Energy and Multi-Effect Desalination to Produce Power, Heat and Freshwater [Volume 8, Issue 3, 2017, Pages 3-11]
Rahnama, Ahmad Design and Analysis of a twin-engine subsonic drone capable of carrying [Volume 8, Issue 4, 2017, Pages 19-27]
Rajabi, Hamed Investigation of the effect of hemolymph on biochemical behavior of dragonfly wing veins [Volume 9, Issue 2, 2017, Pages 41-48]
Roozbahani, Mehrnaz Mass Optimization of Liquid Fuel Rocket Engines’ Under Pressure Reservoirs Utilizing Composites [Volume 9, Issue 1, 2017, Pages 27-37]
Roozbahani, Mehrnaz Numerical simulation of airflow in a drying chamber under compulsory convection and investigating the effect of drying chamber geometry on its efficiency [Volume 9, Issue 2, 2017, Pages 21-27]

S

Sabaghiyan, Jamshid Aerodynamic optimization and numerical simulation of 550 KW horizontal axial wind turbine LM19 series blade [Volume 9, Issue 3, 2018, Pages 16-24]
Salehi, M. Performance of Micro-electromechanical systems devices for space applications [Volume 8, Issue 2, 2016, Pages 23-27]
Salehi, Mehdi Structural damage detection using Hilbert-Huang Transform and instantaneous signal phase [Volume 8, Issue 4, 2017, Pages 3-12]
Salehi, Mehdi noise reduction of vibrational signals based on singular spectrum analysis and fault diagnosis of ball bearing using artificial neural network [Volume 9, Issue 2, 2017, Pages 13-20]
Sanaei nik, Esmaeil Modeling and Optimization of Cooling System of Passenger Train with Refrigerant Air [Volume 9, Issue 2, 2017, Pages 3-12]
Sarmasti Emami, Mohammad Reza Experimental investigation of five affecting parameters on geyser boiling in a two-phase closed thermosyphon [Volume 8, Issue 4, 2017, Pages 13-18]
Shafiei, Maisam Explaining architectural and mechanical design methods for creating human comfort in the architectural space [Volume 9, Issue 3, 2018, Pages 3-15]
Shahnazari, Mohammadreza Analytical Study of The Nonlinear Fluid Flow Equation In The Porous Media With The Considering of The Forchheimer Term and The Convection Heat Transfer Coefficient Evaluation [Volume 9, Issue 1, 2017, Pages 38-44]
Shamshiri, Ahmadreza Production and study performance of a sample of 3000 PSI electro-hydraulic valve used in the aviation industry [Volume 9, Issue 2, 2017, Pages 36-40]
Shamsi, Shahin xergy Analysis for AC Electric Arc Furnace of an Steel Production Factory [Volume 9, Issue 1, 2017, Pages 46-50]
Shiri Varnamkhasti, Masoud A review of milling with the minimum quantity lubrication using vegetable oils [Volume 9, Issue 3, 2018, Pages 50-59]
Shokoohi bafghi, A. Numerical Investigation of influence conductivity and convection Heat Transfer Compound non-Newtonian fluid Different Gradient the temperature inside the chamber [Volume 8, Issue 3, 2017, Pages 12-17]
Shokouhmand, Hossein Experimental study of nano-fluids viscosity in the absence and presence of conductive magnetic field [Volume 8, Issue 3, 2017, Pages 28-34]
Shokouhmand, Hossein Effect of Hot Rolling Parameters on Roller Heat Transfer [Volume 9, Issue 4, 2018, Pages 35-42]
Shokuhmand, Hosein Investigation of performance of solar heaters using Nano-fluid and twisted-tape inserted in tubes [Volume 9, Issue 3, 2018, Pages 41-49]

T

Taherkhani, Abolfazl Determination Of Fracture Forming Limit Diagram In Single Point Incremental Forming For aluminum alloy 3105 [Volume 8, Issue 3, 2017, Pages 35-41]
Taherkhani, M. A double vortex tube and experimental comparison with conventional vortex tube [Volume 8, Issue 2, 2016, Pages 9-16]

V

Vesogh, M Thermodynamic Analysis of a Gas Preheater at Zandjan City Gate Station [Volume 8, Issue 1, 2016, Pages 27-32]

Z

Zallaghi, Behnam Optimization Design of Thin Film Solar Cells for Nano-Area Applications at Visible Wavelenght [Volume 8, Issue 3, 2017, Pages 42-52]
Zare, Azam Investigation of the effect of hemolymph on biochemical behavior of dragonfly wing veins [Volume 9, Issue 2, 2017, Pages 41-48]